Why run your own email server? Perhaps you have a website, which needs to send emails to users, or maybe you want to store your emails on your own server to protect your privacy. However, building your own email server from scratch can be a pain in the butt because there are so many software components you need to install and configure properly. To make this journey easy for you, I’m creating a tutorial series on how to build your own email server on CentOS 8/RHEL 8.
I’m confident to say that this is the best and most comprehensive tutorial series about building an email server from scratch on the Internet. Not only will you have a working email server, but also you will have a much better understanding of how email works. This tutorial series is divided into 14 parts:
- Setting up a basic Postfix SMTP server
- Set up Dovecot IMAP server and TLS encryption
- Create Virtual Mailboxes with PostfixAdmin
- Creating SPF and DKIM record to get through spam filters
- Setting up DMARC to protect your domain reputation
- How to Stop Your Emails From Being Marked as Spam
- How to Host Multiple Mail Domains in PostfixAdmin
- Blocking Email Spam with Postfix
- Blocking Email Spam with SpamAssassin
- Setting Up Amavis and ClamAV to Check Viruses in Email Messages
- How to Secure Email Server Against Hacking with Self-hosted VPN Server
- How to Bypass Email Blacklists
- (optional) Enable and Configure Postscreen in Postfix to Block Spambots
- 🔥 Automatic IP and Domain Warm-up For Your Email Server
I know this seems to be a very daunting task. However, based on what you want to achieve, you might not need to follow all of them. My articles are easy to follow, so if you dedicate some time to it, you will have a working email server.
Hint: If you don’t want to build an email server from scratch, which is a long and tedious process, you can use Scalahosting managed VPS to set up a full-featured mail server quickly and easily.
This article is part 1 of this tutorial series. In this article, I will show you how to set up a basic Postfix SMTP server, also known as an MTA (message transport agent). Once you finish this article, you should be able to send and receive emails with your own email domain on your own email server.
Postfix is a state-of-the-art message transport agent (MTA), aka SMTP server, which serves two purposes.
- It’s responsible for transporting email messages from a mail client/mail user agent (MUA) to a remote SMTP server.
- It’s also used to accept emails from other SMTP servers.
Postfix was built by Wietse Venema who is a Unix and security expert. It’s easy to use, designed with security and modularity in mind, with each module running at the lowest possible privilege level required to get the job done. Postfix integrates tightly with Unix/Linux and does not provide functionalities that Unix/Linux already provides. It’s reliable in both simple and stressful conditions.
Postfix was originally designed as a replacement for Sendmail – the traditional SMTP server on Unix. In comparison, Postfix is more secure and easier to configure. It is compatible with Sendmail, so if you uninstall Sendmail and replace it with Postfix, your existing scripts and programs will continue to work seamlessly.
In this tutorial, you will learn how to configure Postfix for a single domain.
Choosing the Right Hosting Provider
It’s not an easy task to find a VPS (Virtual Private Server) provider suitable for email hosting. Many hosting companies like DigitalOcean blocks port 25. DigitalOcean would not unblock port 25, so you will need to set up SMTP relay to bypass blocking, which can cost you additional money. If you use Vultr VPS, then port 25 is blocked by default. They can unblock it if you open a support ticket, but they may block it again at any time if they decide your email sending activity is not allowed. Vultr actually may re-block it if you use their servers to send newsletters.
Another problem is that big well-known hosting providers like DigitalOcean or Vultr are abused by spammers. Often the server IP address is on several blacklists. Vultr has some entire IP ranges blacklisted.
Kamatera VPS is a very good option to run a mail server because
- They don’t block port 25.
- The IP address isn’t on any email blacklist. (At least this is true in my case. I chose the Dallas data center.) You definitely don’t want to be listed on the dreaded Microsoft Outlook IP blacklist or the SpamRats blacklist. Some blacklists block an entire IP range and you have no way to delist your IP address from this kind of blacklists.
- You can edit PTR record to improve email deliverability.
- They allow you to send newsletters to your email subscribers with no hourly limits or daily limit, whatsoever. Note that you are not allowed to send spam, also known as unsolicited bulk email. If the recipient doesn’t explicitly give you permission to send emails, and you send emails to them, that’s unsolicited email.
- You can order multiple IP addresses for a single server. This is very useful for folks who need to send a large volume of emails. You can spread email traffic on multiple IP addresses to achieve better email deliverability.
I recommend following the tutorial linked below to properly set up a Linux VPS server on Kamatera.
You also need a domain name. I registered my domain name from NameCheap because the price is low and they give you whois privacy protection free for life.
Things To Do Before Installing Postfix
To make Postfix perform better and get the most out of Postfix, you need to properly set up your CentOS 8/RHEL 8 Server.
Set A Correct Hostname for CentOS 8/RHEL 8 Server
By default, Postfix uses your server’s hostname to identify itself when communicating with other MTAs. Hostname can have two forms:
The single word form is used mostly on personal computers. Your Linux home computer might be named
ubuntu etc. FQDN (Fully Qualified Domain Name) is commonly used on Internet-facing servers and we should use FQDN on our mail servers. It consists of two parts: a node name and a domain name. For example:
is an FQDN.
linuxbabe.com is the domain name. FQDN will appear in the smtpd banner. Some MTAs will reject your emails if your Postfix does not provide FQDN in smtpd banner. Some MTAs even query DNS to see if FQDN in the smtpd banner resolves to the IP of your mail server.
Enter the following command to see the FQDN form of your hostname.
If your CentOS 8/RHEL 8 server doesn’t have an FQDN yet, you can use
hostnamectl to set one.
sudo hostnamectl set-hostname mail.yourdomain.com
A common FQDN for mail server is
mail.yourdomain.com. You need to log out and log back in to see this change at the command prompt.
Create DNS Records for Your Mail Server
You need to go to your DNS hosting service (usually your domain registrar like NameCheap) to create DNS records.
An MX record tells other MTAs that your mail server
mail.yourdomain.com is responsible for email delivery for your domain name.
MX record @ mail.linuxbabe.com
A common name for the MX host is
mail.yourdomain.com. You can specify more than one MX record and set priority for your mail servers. A lower number means higher priority. Here we only use one MX record and set
0 as the priority value. (0 – 65355)
Note that when you create the MX record, you should enter
@ or your apex domain name in the name field like below. An apex domain name is a domain name without any sub-domain.
An A record maps an FQDN to an IP address.
If your server has a public IPv6 address, it’s also a good idea to add AAAA record for
Hint: If you use Cloudflare DNS service, you should not enable the CDN feature when creating A and AAAA record for
mail.your-domain.com. Cloudflare does not support SMTP proxy.
A pointer record, or PTR record, maps an IP address to an FQDN. It’s the counterpart to the A record and is used for reverse DNS (rDNS) lookup.
Reverse resolution of IP address with PTR record can help with blocking spammers. Many MTAs accept email only if the server is really responsible for a certain domain. You should definitely set a PTR record for your email server so your emails have a better chance of landing in the recipient’s inbox instead of the spam folder.
To check the PTR record for an IP address, you can use the following command.
PTR record isn’t managed by your domain registrar. It’s managed by the person who gives you an IP address. Because you get IP address from your hosting provider, not from your domain registrar, so you must set PTR record for your IP address in your hosting provider’s control panel. Its value should be your mail server’s hostname:
mail.your-domain.com. If your server uses IPv6 address, then add a PTR record for your IPv6 address as well.
To edit the reverse DNS record for your Kamatera VPS, log into the Kamatera client area, then open a support ticket and tell them to add PTR record for your server IP addresss to point the IP address to
mail.your-domain.com. It’s not convenient, you might think, but this is to keep spammers away from the platform, so legitimate email senders like us will have a great IP reputation.
After all of the above is done, let’s play with Postfix.
On your CentOS 8/RHEL 8 server, run the following two commands.
sudo dnf update sudo dnf install postfix -y
Once it’s installed, start Postfix SMTP server.
sudo systemctl start postfix
And enable auto-start at boot time.
sudo systemctl enable postfix
Now you can check its status with:
systemctl status postfix
As you can see, Postfix is now active (running) and auto-start at boot time is enabled. You can check Postfix version with this command:
CentOS 8/RHEL 8 ships with Postfix v3.3.1.
mail_version = 3.3.1
Postfix ships with many binaries under the
/usr/sbin/ directory, as can be seen with the following command.
rpm -ql postfix | grep /usr/sbin/
/usr/sbin/postalias /usr/sbin/postcat /usr/sbin/postconf /usr/sbin/postdrop /usr/sbin/postfix /usr/sbin/postkick /usr/sbin/postlock /usr/sbin/postlog /usr/sbin/postmap /usr/sbin/postmulti /usr/sbin/postqueue /usr/sbin/postsuper /usr/sbin/sendmail /usr/sbin/sendmail.postfix /usr/sbin/smtp-sink /usr/sbin/smtp-source
ss utility (socket statistics) tells us that the Postfix master process is listening on TCP port 25 of the localhost. (If your CentOS 8/RHEL 8 server doesn’t have the
ss command, you can run
sudo dnf install iproute command to install it.)
sudo ss -lnpt | grep master
Listening on the public IP address
We can also use the following command to see which interface Postfix is listening on. Postconf is a Postfix configuration utility that can display the value of parameters in Postfix main configuration file (
inet_interfaces = localhost
We need to run the following command to configure Postfix to listen on the public IP address so it will be able to receive emails from other SMTP servers. The
-e option enables postconf to edit the Postfix main configuration file.
sudo postconf -e "inet_interfaces = all"
Setting the Postfix hostname
By default, Postfix SMTP server uses the OS’s hostname. You can display the current Postfix hostname with the following command.
Postfix uses this hostname to identify itself when communicating with other SMTP server. However, the OS hostname might change, so it’s a good practice to set the hostname directly in Postfix configuration file with the following command.
sudo postconf -e "myhostname = mail.yourdomain.com"
Note: It’s not recommended to use the apex domain
myhostname. Technically you can use the apex domain, but it will create problems in later parts of this tutorial series.
Setting $mydomain Parameter
$mydomain parameter specifies the local internet domain name. The default is to use
$myhostname minus the first component. You can display the current value of
It should be your apex domain name, like
If it’s not displaying your apex domain name, then set the $mydomain parameter with:
sudo postconf -e "mydomain = yourdomain.com"
Setting $myorigin Parameter
$myorigin parameter specifies the default domain name that will be appended to sender and recipient addresses that have no @domain part. The default is to use the value of
$myhostname, as can be seen with:
myorigin = $myhostname
You need to change its value to yourdomain.com, so a sender on your mail server will have
sudo postconf -e "myorigin = yourdomain.com"
Setting $mydestination Parameter
$mydestination parameter specifies the list of domains that your server considers itself the final destination for. You can display the current value of $mydestination with:
mydestination = $myhostname, localhost.$mydomain, localhost
The default value allows your Postfix SMTP server to receive emails coming for
[email protected] and
[email protected], but it won’t allow you Postfix SMTP server to receive emails coming for
[email protected]. In order to achieve that, add
yourdomain.com to the list of domains.
sudo postconf -e "mydestination = yourdomain.com, $myhostname, localhost.$mydomain, localhost"
Finally, we need to restart Postfix for the changes to take effect.
sudo systemctl restart postfix
Open TCP Port 25 (inbound) in Firewall
The inbound TCP port 25 needs to be open, so Postfix can receive emails from other SMTP servers. Run the following commands to open the inbound TCP port 25.
sudo firewall-cmd --permanent --add-port=25/tcp sudo systemctl reload firewalld
If your CentOS server doesn’t have the
firewall-cmd command, then you need to install FirewallD beforehand.
sudo dnf install firewalld sudo systemctl start firewalld sudo systemctl enable firewalld
Then we can scan open ports on the mail server with an online port scanner. Enter your mail server’s public IP address and select scan all common ports.
You can see from the above screenshot that TCP port 25 is open on my mail server.
Checking If Port 25 (outbound) is blocked
The outbound TCP port 25 needs to be open, so Postfix can send emails to other SMTP servers. The outbound TCP port 25 is controlled by your hosting provider, we can install the
telnet utility to check if it’s open or blocked.
sudo dnf install telnet -y
Run the following command on your mail server.
telnet gmail-smtp-in.l.google.com 25
If it’s not blocked, you would see messages like below, which indicates a connection is successfully established. (Hint: Type in
quit and press Enter to close the connection.)
Trying 188.8.131.52... Connected to gmail-smtp-in.l.google.com. Escape character is '^]'. 220 mx.google.com ESMTP y22si1641751pll.208 - gsmtp
If port 25 (outbound) is blocked, you would see something like:
Trying 2607:f8b0:400e:c06::1a... Trying 184.108.40.206... telnet: Unable to connect to remote host: Connection timed out
In this case, your Postfix can’t send emails to other SMTP servers. Ask your ISP/hosting provider to open it for you. If they refuse your request, you need to set up SMTP relay to bypass port 25 blocking or use a VPS like Kamatera that doesn’t block port 25.
Some folks might be asking, “Can I change port 25 to another port to bypass blocking”? The answer is no. Changing the port works only when you control both the server-side and client-side. When Postfix sends emails, it acts as the SMTP client. The recipient’s mail server acts as the SMTP server. You don’t have control over the receiving SMTP server. SMTP servers are listening on port 25 to receive emails. They expect SMTP clients to hit port 25. There’s no other port for receiving emails. If you don’t connect to port 25 of the receiving SMTP server, you won’t be able to send emails.
Sending Test Email
As a matter of fact, we can now send and receive email from the command line. If your CentOS 8/RHEL 8 server has a user account called
user1, then the email address for this user is
[email protected]. You can send an email to root user
[email protected]. You can also send emails to Gmail, yahoo mail or any other email service.
When installing Postfix, a sendmail binary is placed at
/usr/sbin/sendmail, which is compatible with the traditional Sendmail SMTP server. You can use Postfix’s sendmail binary to send a test email to your Gmail account like this:
echo "test email" | sendmail [email protected]
In this simple command, sendmail reads a message from standard input and make “test email” as the message body, then send this message to your Gmail account.
You should be able to receive this test email in your Gmail inbox (or spam folder). It’s likely that emails sent from your domain are labeled as spam. Don’t worry, we will tackle it in part 4 and part 6 of this tutorial series.
You can see that although we didn’t specify the From: address, Postfix automatically append a domain name for the From: address. That’s because we have set the
$myorigin parameter. Also, you can try to reply to this test email to see if Postfix can receive email messages.
Note: The From: domain name is determined by the
myorigin parameter in Postfix, not by the
The inbox for each user is located at
/var/mail/ file. If you are unsure where to look for the inbox, use this command.
The Postfix mail log is stored at
Still Can’t Send Email?
If port 25 (outbound) is not blocked, but you still can’t send emails from your own mail server to your other email address like Gmail, then you should open the mail log (
/var/log/maillog) with a command-line text editor, such as Nano. Run the following command to install Nano.
sudo dnf install nano
Then open the mail log file.
sudo nano /var/log/maillog
For example, some folks might see the following lines in the file.
host gmail-smtp-in.l.google.com[2404:6800:4003:c03::1b] said: 550-5.7.1 [2a0d:7c40:3000:b8b::2] Our system has detected that 550-5.7.1 this message does not meet IPv6 sending guidelines regarding PTR 550-5.7.1 records and authentication. Please review 550-5.7.1 https://support.google.com/mail/?p=IPv6AuthError for more information
This means your mail server is using IPv6 to send the email, but you didn’t set up IPv6 records. You should go to your DNS manager, set
AAAA record for
mail.your-domain.com, then you should also set
PTR record for your IPv6 address. (PTR record is managed by the organization that gives you an IP address.)
To save a file in Nano text editor, press
Ctrl+O, then press
Enter to confirm. To exit, press
Using the mail program to Send and Read Email On the Command Line
Now let’s install a command-line MUA (mail user agent).
sudo dnf install mailx
To send email, type
mail [email protected]
[email protected]:~$ mail [email protected] Cc: Subject: 2nd test email I'm sending this email using the mail program.
Enter the subject line and the body text. To tell
Ctrl+D and mail will send this email message for you.
To read incoming emails, just type
Here’s how to use the
- To read the first email message, type
1. You will see both the email headers and email body. If only parts of the message is displayed, press
Enterto show the remaining part of the message.
- To display message headers starting from message 1, type
- To show the last screenful of messages, type
- To read the next email message, type
- To delete message 1, type
- To delete message 1, 2 and 3, type
d 1 2 3.
- To delete messages from 1 to 10, type
- To replay to message 1, type
- To exit out of mail, type
Messages that have been opened will be moved from
/home/ file. That means other mail clients can’t read those messages. To prevent this from happening, type
x instead of
q to exit out of the mail.
How To Increase Attachment Size Limit
By default, the attachment cannot be larger than 10MB, which is indicated by the
message_size_limit = 10240000
This parameter defines the size limit for emails originating from your own mail server and for emails coming to your mail server. To allow attachment of 50MB in size, run the following command.
sudo postconf -e message_size_limit=52428800
Note that the
message_size_limit should not be larger than the
mailbox_size_limit, otherwise Postfix might not be able to receive emails. The default value of
mailbox_size_limit is 51200000 bytes (about 48MB), as can be seen with
mailbox_size_limit = 51200000
Set the value to
0, so mailbox has no size limit.
sudo postconf -e mailbox_size_limit=0
Restart Postfix for the changes to take effect.
sudo systemctl restart postfix
When sending an email with large attachments from your mail server, you should also beware of the receiving server’s attachment size limit. For example, You can not send an attachment larger than 25MB to a Gmail address.
Creating Email Alias
There are some required aliases that you should configure when operating your mail server in a production environment. You can add email alias in the
/etc/aliases file, which is a special Postfix lookup table file using a Sendmail-compatible format. Install the Nano command-line text editor and open this file.
sudo dnf install nano sudo nano /etc/aliases
By default, the Postfix package on CentOS 8 defines many aliases, such as
The left-hand side is the alias name. The right-hand side is the final destination of the email message. So emails for [email protected] will be delivered to [email protected]. The postmaster email address is required by RFC 2142.
Normally we don’t use the root email address. Instead, the postmaster can use a normal login name to access emails. So you can add the following line. Replace
username with your real username.
This way, emails for [email protected] will be delivered to [email protected]. Now you can save and close the file. Then rebuild the alias database with the
Using IPv4 Only
By default, Postfix uses both IPv4 and IPv6 protocols, as can been seen with:
inet_protocols = all
Postfix will try IPv6 first if the receiving SMTP server has an IPv6 address. If your mail server doesn’t have a public IPv6 address, it’s better to disable IPv6 in Postfix to prevent unnecessary IPv6 connections. Simply run the following command to disable IPv6 in Postfix.
sudo postconf -e "inet_protocols = ipv4"
You can also make Postfix use IPv4 first with the following command.
sudo postconf -e "smtp_address_preference = ipv4"
Then restart Postfix for the changes to take effect.
sudo systemctl restart postfix
Postfix Automatic Restart
If for any reason your Postfix process is killed, you need to run the following command to restart it.
sudo systemctl restart postfix
Instead of manually typing this command, we can make Postfix automatically restart by editing the
postfix.service systemd service unit. To override the default systemd service configuration, we create a separate directory.
sudo mkdir -p /etc/systemd/system/postfix.service.d/
Then create a file under this directory.
sudo nano /etc/systemd/system/postfix.service.d/restart.conf
Add the following lines in the file, which will make Postfix automatically restart 5 seconds after a failure is detected.
[Service] Restart=on-failure RestartSec=5s
Save and close the file. Then reload systemd.
sudo systemctl daemon-reload
To check if this would work, kill Postfix with:
sudo pkill master
Then check Postfix status. You will find Postfix automatically restarted.
systemctl status postfix
Congrats! Now you have a basic Postfix email server up and running. You can send plain text emails and read incoming emails using the command line. In the next part of this tutorial series, we will learn how to install Dovecot IMAP server and enable TLS encryption, which will allow us to use a desktop mail client like Mozilla Thunderbird to send and receive emails. Stay tuned!